Avedis Audio MD7 Microphone Preamplifier 500 Series
All discrete op-amp based preamplifier with Jensen® Transformers, Send and Return/DI for adding external effects.
FEATURES
- Gain range from 0dB – 64dB in 4dB steps for recall-ability
- Input Trim control for fine control of gain
- No input PAD to drive transformer into saturation during peaks
- Utilizes the discrete 1122 op-amp known for depth and resolution
- All discrete design with Class A buffer amplifier
- Line Input to interface with DAW’s
- Custom Jensen input & output transformers
- SEND feature to run signal through stomp boxes for variety of effects
- Wide bandwidth, high headroom, very low noise
- Phase reverse, and filtered 48V phantom power
- High Pass Filter using a gentle slope for natural bass roll-off (-3dB @ 80Hz)
- 10 Meg-ohm high impedance DI input great for all instrument pickups
- Perfect for using as a re-amplification device
- Designed and manufactured in Los Angeles
Frequency Response | <10Hz to -3dB at 75kHz |
Mic Input Impedance | ≅1500 ohms |
Line Input Impedance | 10k ohms |
Output Impedance | <75 ohms |
DI Input Impedance | 10M Ohms |
SEND Output Impedance | 300 Ohms |
Common Mode Rejection Ratio | >123dB min @ 60Hz |
Maximum Output Level | +28.8 dBu @ 100KΩ, +27.4 dBu @ 600Ω |
Power Requirements | ±16 vdc @ 35mA per rail |
Gain Voltage | 0 to 22 Volts |
Gain dB | 0 to 64.7 dB |
Equivalent Input Noise | −114 dBu; Unweighted 300kHz bandwidth |
Weight | 2.6 lbs / 1.18kg |