The Millennia HV-3D-8 Microphone Preamp provides the discriminating engineer with 8-channels of bulletproof preamps, delivering the pure tone of the source and microphone.
The Millennia HV-3D-8 Microphone Preamp is the preamplifier that you come to when you are ready to make the commitment to capturing audio that is without compromise. It’s the preamp you go to when you have requirements that other preamplifiers just cannot meet. It’s the preamp that you go to when a mistake is not an option and it absolutely must be right from the beginning. The Millennia HV-3D is the preamp with whom recording professionals entrust their careers.
The folks at Millennia Media offer the HV-3D as a bank of pre-amplifiers that can be configured on a channel by channel basis. Let’s say that you need to dedicate 4 channels of the 8 to use with ribbon or dynamic microphones. This is not a problem. The DC-Decoupling mod can be applied to as many or as few channels as needed. Similarly, if you are a fan / user of the high-headroom DPA / B&K +130 Volt microphone systems, then the Millennia Media preamps will already be familiar. The +130 Volt option can be applied to as many or as few channels as desired. Front End Audio is intimately familiar with these options and we will help guide you through configuring an HV-3D system that is perfect for you.
Millennia HV-3D-8 Microphone Preamp Features
- Unsurpassed ambience retrieval
- Transformerless design with matched hi-speed discrete transistor octet has 23 dB input headroom: no attenuator “pads”needed
- Uncolored timbral accuracy at all dynamic levels
- Entirely balanced audio path with precision components maintains signal integrity: THD under 5 ppm (.0005%)
- Effortless, vividly realistic, musical performance
- Laser-trimmed FET-based output stage has 32 dB headroom: drives 1000 foot (300 m) cable runs with ease
- Standard 36-step gain controls (1.5 dB per step) are stereo matched to .08 dB
- Ultra-clean toroid power supply
- Gold audio connectors and switches
- Mogami Neglex OFC audio wiring
- Silver Teflon power wiring
- Welded 16 gauge steel rack chassis
Millennia HV-3D-8 Microphone Preamp Specifications
- Minimum Gain: 8.5 dB
- Maximum Gain: (1.5 dB per step, 36 steps): 65 dB (up to 75 dB on request)
- Frequency Response: +0 / -3 dB: sub 3 Hz to beyond 300 kHz
- Noise: 60 dB Gain, 10 Hz – 30 kHz, Inputs common: -133 dB EIN
- Total Harmonic Distortion + Noise: 35 dB Gain, 10 Hz – 20 kHz bandwidth, +27 dBu Out: < .001%, Typ. < .0005% (< 5 ppm)
- Intermodulation Distortion: (50 Hz & 7 kHz) 35 dB Gain, +27 dBu Out: < .0009%
- Phase Response: 35 dB Gain, 50 Hz – 20 kHz bandwidth, +27 dBu Out: < 2 degrees deviation
- Common Mode Rejection Ratio: 35 dB Gain, 10 Hz – 20 kHz bandwidth, 100 mV C.M.: > 65 dB, Typ > 85 dB
- Slew Rate: 35 dB Gain, +27 dBu Out: > 25 Volts per microsecond
- Maximum Input Level: 20 Hz – 40 kHz: +23 dBu (no attenuator pads required)
- Maximum Output Level: 20 Hz – 40 kHz: +32 dBu
- Phantom Input Impedance: 1 kHz: 6,750 ohms
- Output Impedance: 24.3 Ohms (x2)
- DPA (B&K) Mic Powering: +130 V dc max, (non-phantom) (OPTIONAL)
- Phantom Powering: +48 V dc, +/- 2 V dc
- Power Consumption: 45 watts maximum
- Power Requirements Selectable: 100-120, 200-240 V ac, 50/60 Hz
- Dimensions/Shipping Weight: 19″ W x 3.5″ H x 12.5″ D, 25 lbs.
Millennia HV-3D-8 Microphone Preamp Includes
- Millennia HV-3D-8 Microphone Preamp
- IEC Power Cable
- Manufacturer Warranty